Performing Optional Settings - Kathrein UFS 933 Quick Start Manual

Initial set-up
Tip
Since the channel list for Astra 19.2° is preset by default, it is not necessary to
perform a channel search. The DiSEqC Signal is set to OFF. You can perform a
channel search at any time (Menu ▶ Installation ▶ Auto Scanning).
7.3

Performing optional settings

This section describes how to operate the menu using several examples.
For more information, see the UFS 933 comprehensive instructions for use at
www.kathrein.com.
Channel Lock
20 of 40
10. Press OK or Blue Button to confirm the
selection.
➯ The settings are saved and the chan-
nel list is being loaded. A channel is
shown (example in the figure on the
left). The initial set-up is completed.
1. Press MENU.
➯ The menu Installation appears.
2. Press until the menu Parental Lock
appears.
➯ The menu Parental Lock appears and
the option Channel Lock is active (see
figure on the left).