Specifications - Arcam AV950 Handbook

AV950
Stereo line inputs
Maximum input

specifications

Nominal sensitivity
Input impedance
Signal/noise ratio (A-wtd ref 100W) normal/stereo direct
Frequency response
Preamplifier outputs
Nominal output level
Output impedance
THD+N (20Hz—20kHz)
Video inputs
Component video signal/noise
Composite video signal/noise
Headphone output
Maximum output level into 32
Ω
Output impedance
General
Mains voltage
Power consumption (maximum)
Power consumption (idle, typical)
Power consumption (standby)
Dimensions
W x D (including speaker terminals) x H (including feet)
Weight (net)
Weight (packed)
Supplied accessories
E&OE
NOTE: All specification values are typical unless otherwise stated.
Continual improvement policy
Arcam has a policy of continual improvement for its
products. This means that designs and specifications
are subject to change without notice.
4.5V rms
1V, 2V, 4V (user adjustable)
47k Ω
100dB/120dB
20Hz—20kHz ± 0.1dB
2V RMS (phono) 4V RMS (XLR)
560
Ω
–100dB
85dB
70dB
2Vrms
<5
Ω
110–120V or 220–240V, 50 –60Hz
100W (Thermal dissipation approx. 340 BTU/hour)
75W (Thermal dissipation approx. 255 BTU/hour)
<0.5W
433 x 425 x 171mm
13.5kg
16.8kg
Mains lead
CR450 remote control
2 x AAA batteries
Manual
DAB/FM aerial
Calibration microphone
E-44
AVR750
Continuous power output, per channel, 8Ω/4Ω
2 channels driven, 20Hz - 20kHz, <0.02% THD 120W/200W
2 channels driven, 1kHz, 0.2% THD 130W/210W
7 channels driven, 1kHz, 0.2% THD 100W/180W
Residual noise & hum (A-wtd) <0.15mV
Stereo line inputs
Maximum input 4.5V rms
Nominal sensitivity 1V, 2V, 4V (user adjustable)
Input impedance 47k
Ω
Signal/noise ratio (A-wtd ref 100W) normal/stereo direct 100dB/120dB
Frequency response 20Hz—20kHz ± 0.1dB
Preamplifier outputs
Nominal output level 1V RMS
Output impedance 560
Ω
THD+N (20Hz—20kHz) –100dB
Video inputs
Component video signal/noise 85dB
Composite video signal/noise 70dB
Headphone output
Maximum output level into 32 Ω 2Vrms
Output impedance <5
Ω
General
Mains voltage 110–120V or 220–240V, 50 –60Hz
Power consumption (maximum) 1.5kW (Thermal dissipation approx. 5200 BTU/hour)
Power consumption (idle, typical) 100W (Thermal dissipation approx. 340 BTU/hour)
Power consumption (standby) <0.5W
Dimensions 433 x 425 x 171mm
W x D (including speaker terminals) x H (including feet)
Weight (net) 16.7kg
Weight (packed) 20.0kg
Supplied accessories Mains lead
CR450 remote control
2 x AAA batteries
Manual
DAB/FM aerial
Calibration microphone
E&OE
NOTE: All specification values are typical unless otherwise stated.
E-45