Conversion Instructions - Electrolux T4900 Installation Manual

Conversion instructions

1. Disconnect the power to the dryer.
2. Remove the back plate.
3. Remove nozzle, see Fig. 3.
4. Mount the enclosed nozzles (1), see Fig. 3.
5. T41200 ONLY: When converting to LPG, remove the existing air
reduction baffle plates and install the supplied plates in accordance with
table in fig. 2.
6. Loosen the measuring branch screw (2) 1/4 turn; connect a manometer
to the measuring branch (2), see Fig. 3.
7. Connect the power and select a programme with heat.
8. Start the dryer.
9. See nozzle pressure in table on the previous page Fig. 1 or Fig. 2 -
set the nozzle pressure on setting screw (4) under cover screw (3),
see Fig. 3.
10. Check that the gas flame burns evenly and has a bluish colour.
11. Mount the cover screw (3), see Fig. 3.
12. Mount the back plate
NOTE: After the conversion has been carried out, the enclosed sign with
the new gas type printed on it must be affixed to the dryer data plate, see
instructions on the last page.
3
1
Installation
3 + 4
2
31
Ø
W00148, W00149