Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Leica ICC50 E
Summary of Contents for Leica ICC50 E
- Page 1 Leica ICC50 E Leica ICC50 W User Manual...
-
Page 2: Table Of Contents
Specifications (Only for Leica ICC50 W) Device Certificates (Only for Leica ICC50 W) Adjusting Settings While in SD Mode WiFi Mode – Capturing and Adjusting Images Using a Wireless Device (Only for Leica ICC50 W) Leica ICC50 E or Leica ICC50 W User Manual... - Page 3 General Notes Leica ICC50 E or Leica ICC50 W User Manual General Notes...
-
Page 4: General Notes
General Notes The Leica ICC50 E or Leica ICC50 W cameras Before installing, operating or using the include an interactive CD-ROM with all relevant instruments, read the user manuals listed user manuals. Keep it in a safe place, and read- above. -
Page 5: Symbols Used
Warning of hazardous electrical voltage This symbol indicates especially impor- tant information that, if not observed, can cause the following: Hazards to personnel Functional disturbances or damaged instruments Leica ICC50 E or Leica ICC50 W User Manual General Notes... -
Page 6: Safety Instructions
Safety Instructions Safety concept Description Location of use Before using your Leica ICC50 E or Leica ICC50 W The Leica ICC50 E or Leica ICC50 W fulfills the See "Safety concept" booklet camera for the first time, please read the "Safety highest requirements for observation and ... - Page 7 Safety Instructions (Continued) Transport EC Declaration of Conformity Use the original packaging for shipping or See "Safety concept" booklet transporting the Leica ICC50 E or Leica ICC50 W camera. Health risks In order to prevent damage from vibrations, Workplaces equipped with microscopes...
- Page 8 3.2 of the R&TTE directive. Intended for indoor use only in all EU member Radio interference suppression in compli- states, EFTA states and Switzerland. ance with EN 55011 class B Leica ICC50 E or Leica ICC50 W User Manual General Notes...
-
Page 9: Regulatory Compliance Information (Regarding Leica Icc50 W Only)
Reorient or relocate the receiving antenna. This transmitter must not be co-located or oper- Increase the separation between the equip- ating in conjunction with any other antenna or ment and receiver. transmitter. Leica ICC50 E or Leica ICC50 W User Manual General Notes... - Page 10 명안전과 관련된 서비스는 할 수 없습니다. (1) l'appareil ne doit pas produire de brouillage, (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Leica ICC50 E or Leica ICC50 W User Manual General Notes...
-
Page 11: Service
Service Leica ICC50 E or Leica ICC50 W User Manual Service... -
Page 12: Care, Maintenance, Contact Persons
Care hair brush before attempting to wipe it Keeping all optical components clean is impor- clean. tant for maintaining good optical performance. Leica ICC50 E or Leica ICC50 W User Manual Service... - Page 13 Do not grease guide surfaces or mechanical doing so is specifically permitted and described Leica Microsystems (Switzerland) Ltd. parts. in this manual. Max Schmidheiny Strasse 201 CH-9435 Heerbrugg (Switzerland) Leica ICC50 E or Leica ICC50 W User Manual Service...
-
Page 14: The Leica Icc50 E Or Leica Icc50 W
The Leica ICC50 E or Leica ICC50 W Leica ICC50 E or Leica ICC50 W User Manual The Leica ICC50 E or Leica ICC50 W... -
Page 15: Introduction
Introduction Thank you for purchasing the Leica ICC50 E or Leica ICC50 W by Leica Microsystems. The special design of the Leica ICC50 E or Leica ICC50 W makes it a universal, highly versatile tool for viewing microscopic specimens and capturing still images or video. -
Page 16: The Basics
2. WiFi mode (only available for ICC50 W) Power Wireless connection to wireless device (tablet, Leica ICC50 E or Leica ICC50 W – 5 V/2 A phone, PC) Power can be provided to the camera in the following ways: 3. -
Page 17: Leica Icc50 E Or Leica Icc50 W: Overview
Green means ready 2. Capture button for SD card capture 3. Mode selection panel 4. SD card slot 5. Power on/off button 6. Service button Leica ICC50 E or Leica ICC50 W User Manual The Leica ICC50 E or Leica ICC50 W... - Page 18 Leica ICC50 E or Leica ICC50 W: Overview (Continued) 1. Ethernet socket for connecting an ethernet cable (cable not provided) 2. HDMI for connecting the provided HDMI cable 3. USB for connecting the provided USB cable Front Infrared window: Receives the signal from the optional remote control.
-
Page 19: Unpacking
If you ordered the handheld remote, you received imaging software, HDMI cable, and USB cable. have also received a power supply. the remote with batteries. Leica ICC50 E or Leica ICC50 W User Manual The Leica ICC50 E or Leica ICC50 W... -
Page 20: Get Ready
Get Ready! Leica ICC50 E or Leica ICC50 W User Manual Get Ready! -
Page 21: Preparation For Use
3. Insert the dovetail (see the underside of Allen key (provided with microscope) 1. If the microscope’s viewing tube is in place, the Leica ICC50 E or Leica ICC50 W) into the remove it. stand support. Attach the Leica camera to the microscope stand: 2. - Page 22 Preparation for Use (Continued) 5. Attach the microscope viewing tube onto the Leica ICC50 E or Leica ICC50 W using the set screw, which is located on the left side of the camera module. Leica ICC50 E or Leica ICC50 W User Manual...
-
Page 23: Get Set
Get Set! Leica ICC50 E or Leica ICC50 W User Manual Get Set! -
Page 24: Connection
Connect the camera to a power source 2. Via provided USB cable to external USB Note the Leica ICC50 E or Leica ICC50 W power supply. requires 5 V/2 A for power, therefore, a proper power supply must be used. -
Page 25: Usb Mode - Capturing And Adjusting Images Using A Computer
USB port, and attach the other the status light is green and one of the Leica ICC50 E or Leica ICC50 W’s field of view, end of the cable to a USB 2.0 port of your mode button's is also green. This may take however, is rectangular with a diagonal of computer. - Page 26 4:3 aspect ratio image on a screen set to an aspect ratio of 16:9 Note: You won't be able to write or read the SD card, if the camera is connected via USB cable with your PC. Leica ICC50 E or Leica ICC50 W User Manual Get Set!
-
Page 27: Sd Mode - Capturing Images Without A Computer Or Without A Wireless Device
3. The status light will blink red. Wait until the status light is green and one of the mode button's is also green. This may take approximately 30 seconds. Leica ICC50 E or Leica ICC50 W User Manual Get Set! - Page 28 HD display (not provided) as a focusing aid. The image is now saved on the SD card. Images ICC50 E or Leica ICC50 W is now ready to capture which are on the SD card can be viewed using images onto the SD memory card.
-
Page 29: Adjusting Settings While In Sd Mode
Press and hold the capture button for 5 seconds. background for both illuminations. Wait for the beep. A new white balance is set. Leica ICC50 E or Leica ICC50 W User Manual Get Set! -
Page 30: Wifi Mode - Capturing And Adjusting Images Using A Wireless Device (Only For Leica Icc50 W)
WiFi Password: leicamicro approximately 30 seconds. 6. Open the appropriate app on your mobile device or appropriate software on your wireless enabled PC for viewing, capturing, and adjusting the camera image. Leica ICC50 E or Leica ICC50 W User Manual Get Set! -
Page 31: Ethernet Mode - Capturing And Adjusting Images Using A Network
24. and wait until both the status LED and the ethernet LED mode button is green. 3. Press the red power button. Leica ICC50 E or Leica ICC50 W User Manual Get Set! -
Page 32: The Camera Remote Control (Optional)
HD display. The only function which works in any mode is the "Info" function which shows details about the camera. Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 33: Optional Remote Control
8. Pairing button 9. Show/hide information box 10. White balance set button 11. Call up the camera menu 12. Arrow keys for navigation 13. OK to confirm Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 34: Viewing Images And Movies With The Optional Remote Control
Playback / fullscreen view next image / previous image Play movie clip left /right fast forward / rewind 2. To return to live view press Thumbnail view Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 35: Calling Up The Camera Menu
3. Press the and buttons to select a menu item. 4. Press the button to confirm a menu item. 5. Press the button again to hide the camera menus. Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 36: Color (Automatic White Balance)
* SETUP WIFI only for ICC50 W The "COLOR" function makes it possible to adapt the camera chip to the ambient light so that color-neutral images can be acquired. Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 37: Color (Manual White Balance)
The "COLOR" function makes it possible to adapt the camera chip to the ambient light so that color-neutral images can be acquired. Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 38: Exposure
4. Correct the values for "EXPOSURE", "GAIN" and "GAMMA" until you SETUP ETHERNET obtain the desired results for the image. SETUP WIFI* * SETUP WIFI only for ICC50 W Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 39: Resolution
This provides optimum results in every situation. Video capture on SD card will always be 1,920 × 1,080 resolution. Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 40: Setup Camera (Camera Settings)
This command resets the camera to the factory settings. All user informa- overlay. tion (such as white balance, resolution etc.) is reset. Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 41: Setup User
COLOR SHOW MENU 10 SECONDS EXPOSURE RESOLUTION SETUP CAMERA SETUP USER SETUP ETHERNET SETUP WIFI* * SETUP WIFI only for ICC50 W Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 42: Setup Ethernet
(Dynamic) or by you using the onscreen keyboard (Static). If you selected "STATIC" for the IP address you can input the following using the onscreen keyboard: IP address IP subnet mask Gateway IP address Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 43: Setup Wifi (Only For Leica Icc50 W)
APPLY SETTINGS After making any changes to the WiFi settings, you must go to "APPLY SETTINGS" and press "OK" on the remote to implement the changes. Leica ICC50 E or Leica ICC50 W User Manual The Camera Remote Control (Optional) -
Page 44: Pairing Cameras With Remotes
Pairing Cameras With Remotes Pairing 3. The microscope only responds to the The Leica ICC50 E or Leica ICC50 W and remote control commands from this the remote control can be paired and remote control. then only respond to each other. This can be... - Page 45 Leica ICC50 E or Leica ICC50 W User Manual...
-
Page 46: Ready! Set! Go
Ready! Set! Go! Now all you need to do is properly set up your microscope, capture your images, and enjoy! Leica ICC50 E or Leica ICC50 W User Manual... -
Page 47: Specifications
Due to the technology of the camera, the speci- fications are changing regularly. Please visit website www.leica-microsystems.com/ education for the latest brochure downloads to find the up to date specifications. Leica ICC50 E or Leica ICC50 W User Manual Specifications... -
Page 48: Specifications
USB cable to external power supply, microscope stand or PC use USB 2.0 or higher (do not use lower USB version for power input) Power requirment max. 10 W Leica ICC50 E or Leica ICC50 W User Manual Specifications... -
Page 49: Specifications (Only For Leica Icc50 W)
Specifications (Only for Leica ICC50 W) Feature Specification Radio technology IEEE 802.11n (HT20) Operating frequency 2,412 – 2,472 MHz (20 MHz) Transmitted power 26.3 mW /14.2 dBm (20 MHz) e.i.r.p Leica ICC50 E or Leica ICC50 W User Manual Specifications... -
Page 50: Certificates (Only For Leica Icc50 W)
Certificates (Only for Leica ICC50 W) Leica ICC50 E or Leica ICC50 W User Manual Specifications... - Page 51 CONNECT WITH US! Leica Microsystems (Schweiz) AG · Max-Schmidheiny-Strasse 201 · 9435 Heerbrugg, Switzerland T +41 71 726 34 34 · F +41 71 726 34 44 www.leica-microsystems.com...
Need help?
Do you have a question about the ICC50 E and is the answer not in the manual?
Questions and answers