Table of Contents
Advertisement
If it is necessary to interrupt the cooking programme
(for example, to add ingredients), switch off the
Clipso Eye Module and programme the cooking time
again.
The maximum cooking time which can be set for
this function is one hour.
To modify the set duration:
1. Press the
the display which corresponds to the hotplate you
wish to programme.
2. Press the
and
buttons to select the “DURATION”
option and press “OK” to confirm.
3. Adjust the minutes by pressing the
4. Press “OK” to confirm. This setting will be memorised.
During the setting process, press the
at the side of the display to reset the time value to zero.
Deactivating the Clipso Eye
Press and hold the red button for 3 seconds.
Alternatively, press the
the side of the display corresponding to the cooking
zone being used.
Press the
and
buttons to select “CLIPSO EYE” and
press “OK” to confirm.
Select the OFF option by pressing the
buttons at the side of the display and press the
“OK” button to stop the cooking programme.
Service Manual
Hobs - 2006
button at the side of
and
buttons.
and
buttons
button at
and
Edition
2006.03.13
G
Language
English
B
13
Advertisement
Table of Contents
