About Your Water Heater - Raypak B0109 Owner's Manual And Installation Instructions

Raypak water heater user manual

Hide thumbs

Table Of Contents

Table of Contents

MODEL TYPE

Congratulations for choosing a Raypak

outdoor installation depending on use of the appropriate installation kit.

The operation of the water heater depends on the application. Typically for hot water applications a water heater

with 'on/off' operation will be installed. For mechanical heating or process applications a water heater with 'Hi/Lo'

operation will be installed.

HOW HOT SHOULD THE WATER BE?

The water heater features an adjustable thermostat, which

allows the most suitable temperature for the application to be

chosen.

To meet the requirements of the National Plumbing Standard

the temperature of the stored water for hot water applications

must not be below 60°C.

HOTTER WATER INCREASES THE RISK OF SCALD INJURY

This water heater can deliver water at temperatures which can

cause scalding. Check the water temperature before use, such

as when entering a shower or filling a bath or basin, to ensure it

is suitable for the application and will not cause scald injury.

We recommend and it may be required by regulations that an

approved temperature limiting device be fitted into the hot water

piping to the bathroom and ensuite when this water heater is

installed. This will keep the water temperature below 50°C at the

bathroom and ensuite. The risk of scald injury will be reduced

and still allow hotter water to the kitchen and laundry.

TEMPERATURE ADJUSTMENT

The thermostat temperature will have been set by the installer to suit the application, adjustment should not be

required. Consult your installer before making any adjustment to the thermostat temperature.

WARNING

This water heater is only intended to be operated by persons who have the experience or the knowledge and the

capabilities to do so. This water heater is not intended to be operated by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge.

Children should be supervised to ensure they do not interfere with the water heater.

The water heater uses 240 Volt AC electrical power for operation of the control systems. The removal of the access

cover(s) will expose 240 Volt wiring. They must only be removed by an authorised or qualified person.