Part Number Information - Lenovo Flex System Fabric CN4093 Product Manual

Part number information

The CN4093 switch is initially licensed for 22x 10 GbE ports. Further ports can be enabled with Upgrade 1
and Upgrade 2 license options. Upgrade 1 and Upgrade 2 can be applied on the switch independently from
each other or in combination for full feature capability. Table 1 shows the part numbers for ordering the
switches and the upgrades.
Table 1. Part numbers and feature codes for ordering
Description
Switch module
Flex System Fabric CN4093 10Gb Converged Scalable Switch
Features on Demand upgrades
Flex System Fabric CN4093 Converged Scalable Switch (Upgrade 1)
Flex System Fabric CN4093 Converged Scalable Switch (Upgrade 2)
The part number for the switch includes the following items:
One Flex System Fabric CN4093 10Gb Converged Scalable Switch
Documentation package
Note: Neither QSFP+ nor SFP+ transceivers or cables are included with the switch. They must be ordered
separately (See Table 3).
The switch does not include a serial management cable. However, Flex System Management Serial Access
Cable, 90Y9338, is supported and contains two cables, a mini-USB-to-RJ45 serial cable and a mini-USB-to-
DB9 serial cable, either of which can be used to connect to the switch locally for configuration tasks and
firmware updates.
The part numbers for the upgrades, 00D5845 and 00D5847, include the following items:
Features on Demand Activation Flyer
Upgrade authorization letter
The base switch and upgrades are as follows:
00D5823 is the part number for the base switch, and it comes with 14 internal 10 GbE ports enabled
(one to each node bay), two external 10 GbE SFP+ ports enabled, and six Omni Ports enabled to
connect to either Ethernet or Fibre Channel networking infrastructure, depending on the SFP+
transceiver or DAC cable used.
00D5845 (Upgrade 1) can be applied on the base switch when you need more external bandwidth with
two 40 GbE QSFP+ ports that can be converted into 4x 10 GbE SFP+ links each with the optional
break-out cables. This upgrade also enables 14 additional internal ports, for a total of 28 internal ports,
to provide more bandwidth to the compute nodes leveraging 4-port expansion cards. This takes full
advantage of four-port adapter cards installed in each compute node and requires the base switch.
00D5847 (Upgrade 2) can be applied on the base switch when you need more external Omni Ports on
the switch or if you want additional internal bandwidth to the node bays. The upgrade will enable the
remaining six external Omni Ports, plus 14 additional internal 10 GbE ports, for a total of 28 internal
ports, to provide more bandwidth to the compute nodes leveraging four-port expansion cards. This
takes full advantage of four-port adapter cards installed in each compute node and requires the base
switch.
Both 00D5845 (Upgrade 1) and 00D5847 (Upgrade 2) can be applied on the switch at the same time to
allow you to use 42 internal 10 GbE ports leveraging six ports on an eight-port expansion card, and to
utilize all external ports on the switch.
Flex System Fabric CN4093 10Gb Converged Scalable Switch (withdrawn product)
Part number Feature code
00D5823 A3HH
00D5845 A3HL
00D5847 A3HM
2