Table of Contents
Advertisement
Easidew Plus Portable Hygrometer User's Manual
If the front panel prevents the connector from fitting onto the sensor, follow the
instructions below:
•
Completely unscrew the cable gland on the GDSN connector to release
the cable tension.
•
Remove the locking screw from the back of the connector (retaining the
metal O-ring).
•
Remove the connector block using a small screwdriver.
•
Rotate the connector block and push it back into the connector housing.
Take care not to trap any wires against the hole for the locking screw.
Kahn Instruments
MAINTENANCE
13
Advertisement
Table of Contents
