Features And Controls - Craftsman 580.752101 Operator's Manual

KNOW YOUR PRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - PrecisionSpray™ Selector — Contains six different
setting for various applications.
C - Cleaning Tank – Used to provide pressure washer safe
detergents into the low pressure stream.
D - Recoil Starter — Used for starting the engine manually.
E - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
F - Warning/Operating Instructions Tag — Identifies hazards
and proper procedure to start/stop pressure washer.
G - Air Filter — Protects engine by filtering dust and debris
out of intake air.
H - Throttle Lever — Sets engine in starting mode for recoil
starter and stops a running engine.
J - Choke Lever — Prepares a cold engine for starting.
K - Pump — Develops high pressure.

FEATURES AND CONTROLS

L - Automatic Cool Down System — Cycles water through
M - Oil Fill/Dipstick — Check, add and drain engine oil here.
N - High Pressure Hose — Connect one end to water pump
P - Accessory Tray — Provides convenient storage for
Items Not Shown:
Data Tag (near rear of base plate) — Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.
High Pressure Outlet — Connection for high pressure hose.
Safety Goggles — Always use the enclosed safety goggles
when running your pressure washer.
Water Inlet — Connection for garden hose.
6
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
and the other end to spray gun.
standard and optional accessories, such as brushes,
turbo wands, etc.
P
N
M
K L
,