Features And Controls - Craftsman 580.752990 Operator's Manual

KNOW YOUR PRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
E
F
G
H
J
K
L
M
A - Spray Tips — Detergent, 0°, 15°, 25° and 40°: for various high
pressure cleaning applications.
B - High Pressure Hose — Connect one end of hose to pump and
the other end to spray gun.
C - Project Pro® PerfectMix™ Siphon — Mixes concentrate with
pressure washer spray.
D - Throttle Lever — Sets engine in starting mode for recoil starter
and stops a running engine.
E - Choke Lever — Used when starting a cold engine.
F - Fuel Valve Lever — Used to turn fuel supply on and off to engine.
G - Recoil Starter — Used for starting the engine manually.
H - Warning/Operating Instructions Tag — Identifies hazards and
proper procedure to start/stop pressure washer.
J - Bottle Bracket — Cleaning solution bottle fits in wire form
bracket here. Concentrate bottle not included.
K - Nozzle Extension with Quick Connect — Allows you to switch
between five different spray tips.
L - Pressure Control Knob — Varies pressure of high pressure spray.
M - Automatic Cool Down System — Cycles water through pump
when water reaches 125°-155°F. Warm water will discharge
from pump onto ground. This system prevents internal pump
damage.

FEATURES AND CONTROLS

N - Detergent Siphoning Tube/Filter — Use to siphon pressure
P - Water Inlet — Connection for garden hose.
R - High Pressure Outlet — Connection for high pressure hose.
S - Oil Drain — Drain engine oil here.
T - Oil Fill — Check and add engine oil here.
U - Pump — Develops high pressure.
V - Air Filter — Protects engine by filtering dust and debris out of
W - Fuel Tank — Fill tank with regular unleaded fuel. Always leave
X - Spray Gun — Controls the application of water onto cleaning
Items Not Shown:
Engine Identification — Provides model, type and code of engine.
Please have these readily available if calling for assistance.
Identification Label (near rear of base plate) — Provides model
and serial number of pressure washer. Please have these readily
available if calling for assistance.
6
washer safe detergents into the low pressure stream.
intake air.
room for fuel expansion.
surface with trigger device. Includes trigger lock.
X
W
V
U
T
S
R
P
N