Features & Controls - Craftsman 580.676660 Owner's Manual

KNOW YOUR PRESSURE WASHER
Read the owner's manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Recoil Starter
Nozzle Extension
with Quick Connect
Air Filter
Primer Bulb
Throttle Lever
Fuel Tank
Air Filter — Protects engine by filtering dust and
debris out of intake air.
Automatic Cool Down System — Cycles water
through pump when water reaches 125°-155°F. Warm
water will discharge from pump onto ground. This
system prevents internal pump damage.
Detergent Pick–Up Tube and Filter – Used to siphon
detergent from chemical bottle to the low pressure
water stream.
Fuel Tank – Fill fuel tank with regular unleaded fuel.
Always leave room for fuel expansion.
High Pressure Hose – Connect one end to the spray
gun and other end to the high pressure outlet.
High Pressure Outlet — Connection for high pressure
hose.
Nozzle Extension with Quick Connect — Allows you
to switch between four different nozzles.
FEATURES AND CONTROLS
Spray Gun
Spray Tips
Pump equipped with
Automatic Cool Down System
Oil Fill Cap and Dipstick – Check and fill engine with
oil here. See page 7 for oil recommendations and
filling instructions.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high water pressure.
Recoil Starter — Used for starting the engine
manually.
Spray Gun – Controls the application of water onto
cleaning surface with trigger device. Includes trigger
lock.
Spray Tips — Chemical injection, 0°, 15°, and 40°: for
various high pressure cleaning applications.
Throttle Control Lever – Sets engine in starting
mode for recoil starter and stops running engine.
Water Inlet — Connection for garden hose.
5
High Pressure Hose
Oil Fill Cap and Dipstick
High Pressure Outlet
& Water Inlet
Detergent Pick–Up
Tube and Filter