Tool Kit And Pressure Test Gauge - AirSep NewLife Intensity 10 Service Manual

Tool Kit and Pressure Test Gauge

6.4
The tools needed for you to properly service the NewLife Intensity 10 unit are listed
below:
Multi-adjustable pliers, wire cutters, needle-nose pliers, slotted-head screwdriver, Phillips-
head screwdriver, ratchet, adjustable wrench, 1-inch deep well socket, 9/16-inch socket, 2-
inch extension, 7/16-inch combination wrench, 9/16-inch combination wrench, and 5/8-
inch combination wrench.
Pressure test adapter (AirSep p/n: KI057-1).
Outlet pressure test kit (AirSep p/n: TU131-2).
A pressure test gauge (AirSep p/n: KI036-1) to read operating system pressures and outlet
pressures on the Intensity 10 unit should be kept available at all times.
MN134-1 rev C
25