Tips In Installing The Connectng Cord For Power Source - Panasonic EP30006 Service Manual

EP30006
ORDER NO.HPD0709C21C1
10.13. TIPS IN INSTALLING THE CONNECTING CORD FOR POWER SOURCE
Move the Massage mechanism block to the highest position.
* After installing each Connecting wires, be sure to move the Massage mechanism block up and down pushing the
buttons on the Controller so as to check whether each Connecting cords do not touch Belts or the Rear cover fixing
plate or are not hooked on the Up/down pinions on both sides. And check also if each Connecting cords are not
extremely tense when the Massage mechanism block is at the highest position.
Caution
When installing the Rear cover, move the Massage mechanism block to the highest position first so as to prevent the
hooking of each Connecting cords. And wind the cord around the wire. If you wind the wire around the cord, the wire
becomes bent.
- 35 -