Installing The Connecting Cord For Power Source - Panasonic EP3202-U1 Service Manual

EP3203-U1

10.11. Installing the Connecting cord for power source

Move the Massage mechanism block to the highest position.
*After installing each Connecting cords, be sure to confirm that each Connecting cords do not touch belts or Rear cover fixing
plate or being stuck in the gear by operating the Up/down button in the controller manual mode. Also confirm that each
Connecting cords are not extremely tense at the highest position.
Caution
After moving the Massage mechanism block to the highest position, install the Rear cover so as to avoid each Connecting
cords being stuck. Wind the cords around the Wire.
42