Panasonic EP30006 Service Manual page 42

EP30006
10.15.8. Removing the Float air bag
1. Remove the Massage mechanism block from the Rear frame.
2. Remove the PCB install plate.
3. Remove the Pin.
4. Remove the Rivet.
5. Unscrew the Screw.
6. Move the Float air bag in the direction of arrows, and
remove it from the hollow parts of the Float air bag.
7. Move the Eccentric link plate in the direction of the arrows
and unhook it.
*Until the hook is released, move the Air bag in the direction of
the arrow 1.
8. Unscrew two Screws on the Float air bag.
- 42 -
ORDER NO.HPD0709C21C1