Zone Control; Sound Effect - Kenwood DNX9180DABS Instructions Manual

Controlling Audio

Zone Control

You can select different sources for front and
rear positions in the vehicle.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [Audio].
h Audio screen appears. h
3
Touch [Zone Control].
h Zone Control screen appears.
h
4
Touch [Zone Select].
5
Touch [Dual Zone].
6
Set each source as follows.
[Zone Select]
■
Touch [Single Zone] to turn off the dual
zone function.
[Front Source] [Rear Source]
■
Select an audio source for each.
[Rear VOL.]
■
Adjust the rear source volume.
72
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/ Bass Boost (P.72)
– Equalizer Control/ Sound Effect/ Listening
Position (P.70, 72, 73)
– Speaker Setup (P.68)
– High-resolution Sound Source File Playback
• You cannot select iPod if it is connected via
Bluetooth.
• If you select iPod, Disc, Spotify or Bluetooth audio
as the Front Source, you cannot select USB or
iPod as the Rear Source.
• If you select Air Mirroring, Apple CarPlay or
Android Auto as the Front Source, you cannot
select DISC (Music CD/ Disc media), USB or iPod
as the Rear Source.

Sound Effect

You can set sound effects.
1
Press the [MENU] button.
h Popup menu appears. h
2
Touch [Audio].
h Audio screen appears.
h
3
Touch [Sound Effect].
4
Set each parameter as follows.
[Bass Boost]
■
Set the amount of bass boost "OFF"/ "1"/ "2"/
"3".