Zone Control - Kenwood DNX893S Quick Start Manual

Controlling Audio

Zone Control

You can select different sources for both
front and rear positions in the vehicle.
1
Press the
volume knob.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Zone Control].
Zone Control screen appears.
4
Touch [Zone Select].
5
Touch [Dual Zone].
96 96
<MENU> button/
6
Set each source as follows.
[Zone Select]
Touch [Single Zone] to turn off the dual zone
function.
[Front Source] [Rear Source]
Select the audio source for each.
[Rear VOL.]
Adjusts the rear channel volume.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/ Bass Boost
– Equalizer Control/ Sound Effect/ Listening
(P.94, 97, 98)
Position
(P. 90)
– Speaker Setup
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, SD, iPod, Disc, Mirroring,
Bluetooth audio, Apple CarPlay or Android Auto
as the Front Source, you cannot select USB, SD or
iPod as the Rear Source.
(P.97)