Adjusting The Volume; Monitor Angle Control; Touch Screen Operations - Kenwood DNX9180DABS Instructions Manual

NOTE
• Please set the date and time. If they not set, some
functions may not work.

Adjusting the volume

To adjust the volume (0 to 40),
Press [R] to increase, and press [S] to decrease.
Holding [R] increases the volume continuously
to level 15.

Monitor Angle Control

You can adjust the position of the monitor.
1
Press the [G] button.
h Angle Adjust screen appears.
h
2
Select a number below that represents
your desired angle setting.
Default is "0".
[Off Position]
■
You can store the current monitor angle as
the angle during power off. Touch [Memory]
when the desired angle is selected.

Touch screen operations

To perform operations on the screen, you need
to touch, touch and hold, flick or swipe to
select an item, display a setting menu screen
or change pages.
● Touch
Touch the screen gently to
select an item on the screen.
● Touch and hold
Touch the screen and keep
your finger in place until
the display changes or a
message is displayed.
● Flick
Slide your finger quickly
to the left or right on the
screen to change the page.
You can scroll a list screen
by flicking up/ down on the
screen.
● Swipe
Slide your finger up or down
on the screen to scroll the
screen.
Basic Operations
11
English