Receive A Call; Operations During A Call - Kenwood DNX9180DABS Instructions Manual

Bluetooth Control
Ñ

Receive a call

1
Touch [ ] to answer a phone call or
] to reject an incoming call.
[
NOTE
• While monitoring the picture from the view
camera, this screen does not appear even if a call
comes in.
To end call
1
While talking, touch [
Ñ

Operations during a call

● Adjust the volume of your voice
1) Touch [Speech Quality].
2) Touch [T] or [U] for [Microphone Level].
54
].
● Adjust the receiver volume
Press the [S] or [R] button.
● Mute your voice
Touch [ ] to mute or not to mute your voice.
● Output the dial tone
Touch [DTMF] to display the tone input screen.
You can send tones by touching desired keys
on the screen.
● Switching between speaking voice
output destinations
Touching [
]/ [
speaking voice output destinations between
the cell-phone and the speaker.
● Call-waiting
When you receive a new call while talking on
the phone, you can answer the newly received
call by touching [ ]. The current call is put on
hold.
Each time you touch [ ], the caller will change
to the other one.
When you touch [ ], the current call will end
to be switched to the call waiting on hold.
● To close the Hands-Free popup screen
Touching [×] to close the Hands-Free popup
screen.
To display it again
1 Press the [HOME] button.
2 Touch [
].
3 Touch [TEL].
] each time switches