Table of Contents
Advertisement
Chapter 2
The optional ultrasonic probe can be used to break up particle agglomerates and
help to remove bubbles from the system.
Once the sample has been measured, an internal drain valve is operated and the dis-
persant and sample are drained to an external beaker
The lid for the well
locked in place by rotating the locking lever
All functions of the dispersion unit are controlled using the Malvern software.
Hardware features
This section describes the hardware in detail.
Main system components
The diagram below shows a typical installation for the Hydro 2000µP. Its main
components are identified. These components are examined in more detail later in
this section.
The external DC Power Supply Unit (PSU) supplies all power requirements to the
dispersion unit.
Page 2-4
should always be fitted during a measurement. The lid is
10
9
Power supply
Hardware features
.
.
1
4
3
8
2
7
6
11
5
ill 5407
MAN 0389
Advertisement
Table of Contents
