Bryant 538P Owner's Manual page 8

........------t--t
7
(•oo~
[r:•]
a'Q'
(SLEEP )
( TURBO )
RG52B4/BGEU1
0
UP Button( ~ )
Pushing this button will increase the indoor
temperature setting in 1°F(1°C) increments up to 86°F(30°C).
DOWN Button(
"V' )
Pushing this button will decrease the indoor
temperature setting in 1°F(1°C) increments up to 62°F (17°C).
NOTE: Press and hold
~~~
and
~'Q',
buttons
together for 3 seconds to alternate the
temperature display between the °C & °F
scale.
9
SHORTCUT Button(
For RG52BIBGEU model)
• Used to restore the current settings or
resume previous settings.
• If the SHORTCUT button is the first function
selected upon unit operation, the unit will
operate in AUTO mode-
80~
(27°C), and auto
fan speed.
• Push this button when remote control is on,
the system will automatically revert back
to the previous settings, including operating
mode, temperature setting, fan speed level
and sleep featureQf activated).
• If pressed for more than 2 seconds, the system
will automatically restore the current operation
settings, including operating mode, temperature
settings, fan speed, and sleep features (if activated).
(l)
FP Button(
For RG52B4JBGEU1 model)
While the air conditioner operates in
heating mode, pressing the LP button
will activate 4EfF (8°C} heating. The display
window on the indoor unit will display "FP".
0
TIMER ON Button
Press this button to initiate the auto-on time
sequence. Each time the TIME ON button is
pressed, it will increase the auto-timed setting
in 30 minute increments. When the time setting
displays 10, the the auto-timed setting will then
increase by 60 minute increments. To cancel the
auto-timed program, simply adjust the auto-on
time to 0.0.