Bryant 538P Owner's Manual page 10

!Indicators on LCD
I
Mode display
Displays the current operation mode. Including
auto(®), cool(*), dry('),
heat~~)
(Not
applicable to cooling only models), fan(@ )
and back to auto(
cD ).
Transmission Indicator
This transmission indicator will illuminate
when remote controller transmits signals to
the indoor unit.
ON/OFF display
~
Displayed by pressing the ON/OFF button.
_ _ _ -f _ _ _ _
1
L
Press the ON/OFF button again to remove.
'9
I
0
ON 5 F F TINIER ON display
AUTO®
SET TEMP.
1
Displayed when TIMER ON time is set.
I
*
~-~~-~1]
;;tl
COOL
f
*
TINIER OFF display
1
DRY • • •
I
Displayed when TIMER OFF time is set.
~
HEAT
:tlf~
1.1.1.1
H
I
Sleep Display
" ' ~ 1111111111111111111111111111
~ 'AN
@
·~
:.·::.·:::.·::::.·:::::.·::::::.
Displayed under sleeping operation.
_ _
~ ~:::~:::~::·~:::~
Press the SLEEP button again to remove.
FOLLOW NIE Display(on some models)
Displayed when FOLLOW ME function is activated.
Temp./Timer display
Indicates the temperature and timer settings. It displays
the temperature setting (6t'F(1 t'C)-BEfF (3cfC)). It displays
"TIMER ON" when the auto--on time function is set, "TIMER OFF"
when the auto--off time function is set, and "TIMER ON OFF
when both functions are set.
L _ _ _ _ _ _ _
Fan speed display
Displays the selected fan speed, AUTO(no display)
and three fan speed levels
"~c
i:::i:
II
(LOW)
·~ :~:::~::::~::m!·ll
(MED)
~~x:~:::~::n~::m~:::!!! 1 :;m!! 1 •
II
(HIGH) can be indicated.
The fan speed is AUTO when the operating mode
is set to either AUTO or DRY.