System Menu - ABB CP410 Installation And Operation Manual

Operation
7.2

System Menu

Set the dip switch SW7 = ON. After the self-test, the system menu of the
operator terminal is displayed on the screen:
A command that is highlighted with black background on the screen is currently
being executed by the operator terminal. Commands with gray background (e.g.
F7, F8 ...) can be executed if the associated function keys are pressed. The func-
tions of the commands are briefly explained below:
System menu command
Link
F7 - Confg
F8 - Copy
F9 - Run
16
The operator terminal is connected.
Sets up the internal time clock and communication
parameters in the operator terminal.
Use and to move to desired field and
to set the value of the field.
Copies application data to another CP410.
Runs the application.
Function
ABB, 1SBC159101M0201
and