Fujitsu AUU7RLF Design & Technical Manual page 125

 UTY-RNNUM
 Button name and function
During address setting mode, indoor unit reject the any operation command from remote controller.
Function number
Refer to Function details
Remote controller address
SET TIME "<" and ">" button
Switches the function number.
 Function setting procedure
1. Connect the power supply of the outdoor unit.
2. Switch to the function setting mode.
To enter the function setting mode, hold down the 3 buttons of SET TEMP.
FAN at the same time for 5 seconds or longer.
3. Select the function number by pressing the SET TIME < or the SET TIME > button.
4. Select the setting number by pressing the SET TEMP.
The display flashes during setting number selection.
or the SET TEMP.
- 119 -
Setting number
Refer to Function details
SET TEMP. "V" and " Λ " button
Switches the setting number.
TIMER SET button
Transmits function setting
, SET TEMP.
button.
, and