Set Commands - Ramsey Electronics COM3010 User Manual

6.50.03 SET Commands

Maj Sub-
or Command
Generator Side
SET GF ###.#####
#MHz
SET GEN,GENSTAT ON/OFF
E
SET GL,LVL,LEVEL -###.#dBm -120
SET MEXT ON/OFF
SET MINT ON/OFF
Property of Ramsey Electronics, Inc.
SET MCTS ON/OFF
SET MDCS ON/OFF
SET MALL Do not reproduce or distribute. OFF
SET GFM
SET GAM
SET EXTDEV ##.####kHz 0Hz
SET EXT% ##%
SET INTTONE #.####kHz 0.1Hz
SET INTDEV ##.####kHz 0Hz
SET INT% ##%
SET AGC #
SET CTS ###.#Hz
SET CTSDEV #.####kHz 0.1Hz
SET DCS ###
SET DCSDEV #.####kHz 0.1Hz
Format Low
0.100000M
Hz
ON
ON
ON
ON
ON
N/A
0%
0%
1
0
See valid
lists.
DETAILED INFORMATION
High Returns
1000.000000 OK/BAD
MHz
OFF OK/BAD
0 OK/BAD
OFF OK/BAD
OFF OK/BAD
OFF OK/BAD
OFF OK/BAD
OFF OK/BAD
75.0000kHz OK/BAD
75% OK/BAD
3.0000kHz OK/BAD
75kHz OK/BAD
75% OK/BAD
4 OK/BAD
999.9 OK/BAD
2.000kHz OK/BAD
OK/BAD
2.000kHz OK/BAD
87
Description
Set Generator
frequency
Sets the Generator
State. By default
when entering the
serial mode, this is
set to ON.
Set Generator Level
Set Mod External
Set Mod Internal
Set Mod CTS
Set Mod DCS
Turn off all
modulations
Set Generator in FM
mode
Set generator in AM
mode
Set FM modulation
deviation
Set AM modulation
percent
Set FM Tone
frequency
Set FM modulation
deviation
Set AM modulation
percent
Set Internal
Modulation AGC
Mode (See valid AGC
mode list)
Set CTS tone in Hz
Set CTS Deviation
Set DCS code
Set DCS Deviation