Generating Dcs - Ramsey Electronics COM3010 User Manual

2.06.04 Generating DCS

GENERATE
Modulation
To activate DCS, press
The LED will light indicating it is on. The DCS code field is now active as indicated by the
blinking icon.
You must enter the DCS code with the
internal list stored in the COM3010. To select a code of 53, use the
keys to select the code.
For inverted digital code, press
Property of Ramsey Electronics, Inc.
"N" or "I" on the end of the code. To invert or de-invert the DCS code, press
toggle the code.
For example: If you had 53N selected for a code, pressing
Do not reproduce or distribute.
will select 53I.
To enter a new deviation value for DCS code generation, press
level desired, followed by Hz/uV.
Example: (For 500Hz deviation)
To turn off DCS, press
Your Notes:
TX Level
Seq/Reg
UP / DOWN
SHIFT, DCS; press them again to return to normal. Note the
21
BASIC OPERATION
keys. You will be selecting from an
FM followed by the deviation
SHIFT, DCS to