Receiving A Frequency; Setting Receiver Step/Increments - Ramsey Electronics COM3010 User Manual

2.07 Receiving a Frequency

RECEIVE
Counter
lowed by KHz /mV or
Example, to receive 162.400 MHz FM:
You can toggle the receive mode simply by pressing:
toggles current frequency to receive the AM component and,
Property of Ramsey Electronics, Inc.
toggles to the FM to receive that portion of it.
The metering will reflect the mode you have selected. Information on that is reserved for the
next few sections.
Do not reproduce or distribute.
2.08 Setting a Receiver Step/Increment
RECEIVE
Counter
RECEIVE FM; the old increment value will appear
To enter a new increment for the generate field, any frequency from 1Hz to 100 MHz can be
used. Typically you would choose your channel spacing as the step size.
Example: To set the step increment for receive FM to 10 kHz.
If you want to escape in the middle of an entry, press
Level Meters
Freq Meters
MHz / -dBm.
Level Meters
Freq Meters
BASIC OPERATION
Setting the receive frequency is performed in
a similar manner to setting the generator.
To receive a frequency, press
RECEIVE AM, followed by the frequency, fol-
Rather than having to move the cursor to a
specific digit to increment frequency, the
COM3010 employs increments for important
fields. To access an increment for the field of
interest, press SHIFT
25
RECEIVE FM, or
then the field such as