Changing The Oil Pump; Removal Of The High Tension Coil - PEUGEOT Speedfight3 Workshop Manual

Changing the oil pump

- Remove the storage compartment. See:
Procedure 1. page 20.
- Remove the lower fairing by sliding it
towards the rear of the vehicle (1 screw).
- Clamp the end of the oil tank outlet pipe
using a clamp ref. 755996.
- Disconnect the oil filter pipe (1).
- Disconnect the oil inlet hose from the
carburettor (2).
- Remove the oil pump (1 screw)(3)
- After refitting the oil pump, purge the oil
circuit as recommended(See manual and
method N° 28).

Removal of the high tension coil

- Remove the storage compartment. See:
Procedure 1. page 20.
- Disconnect and remove the high voltage
coil (1) (1 screw).
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
ELECTRIC COMPONENTS
1
3
1
755996
2
47