Removal Of The Fork Tubes; The Fork And Its Components - PEUGEOT Speedfight3 Workshop Manual

Removal of the fork tubes

- Hold the hydraulic cartridge cylinder (left-
hand side) in place and remove the nut (1).
- Carefully remove the lip seals using a
screwdriver (2).
- Remove the circlip, using a circlip plier (3).
- Remove the fork tubes.
- Remove the springs.
- Remove the rubber stop.
- When refitting, lightly grease the balk
rings (5).

The fork and its components

1. Hydraulic cartridge nut.
2. Lip seal.
3. Circlip.
4. Rubber washer.
5. Balk rings.
6. Expansion spring.
7. Fork lower tube.
8. Compression spring.
9. Rubber stop.
10. Hydraulic cartridge.
11. Stanchion.
After refitting, pump the forks several
times to eliminate the excess grease
inside the tubes. Wipe the grease off the
fork tubes.
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
1
2
9
8
5
7
6
4
5
2
1
11
STEERING / FORK
3
1
10
43