PEUGEOT Speedfight3 Workshop Manual page 33

- Remove the wheel spindle nut and
washer (3).
- Remove the rear wheel.
- Remove the brake linings (4).
- Remove the adjusting nut, the barrel (5) and
the brake control cable (6).
- Remove the brake arm (7), the brake
cam (8) and the spring.
Reassembly.
Lubricate the brake cam spindle and fit it
into the casing.
- Fit the brake arm onto the cam and align the
punched marks (A).
Tightening torque: 8 Nm.
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
8
7
6
5
9
SERVICE OPERATIONS
3
4
8
5
A
31