The Carburettor And Its Components - PEUGEOT Speedfight3 Workshop Manual

FUEL SYSTEM
- Position the pin in its recess.
- Fit and tighten the screw (C) that secures
the float pin.
N
Install a new paper gasket (11).
- Fit teh float chamber.
- Fit and tighten the 4 screws of teh float
chamber.
- Re-install all the other components and, if
necessary, when starting the engine,
readjust according to the values indicated
on the technical data card.
• Idle speed:
Air cooling: 1800 rpm
Fluid cooling system: 1800 rpm
• Mixture screw: 1 tr 3/4

The carburettor and its components

2. Piston.
3. Needle.
4. Clips.
5. Petrol filter.
6. Heater element.
7. Starter clamping plate.
8. Choke.
9. Float chamber gasket.
10. Float pin screw.
11. Float.
12. Float pin.
13. Needle valve.
14. Idle jet.
15. Main jet.
16. Venturi.
17. Idle screw.
18. Mixture screw.
52
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
11
5
8
7
16
13
11
12
10
C
4
2
3
6
18
17
14
15
9