PEUGEOT Speedfight3 Workshop Manual page 36

SERVICE OPERATIONS
- Lock the clutch drum with the pin wrench
P/N 752237.
- Remove the clutch drum and the clutch and
drive pulley assembly.
Tightening torque: 45 Nm.
Checking the drive pulley
- Remove the bump-stop. (2) (3 screw).
- Remove the holder (3) and its 3 plastic
guides.
- Remove the moving flange (5)
6 bearings (4).
- The bearings must be changed if they show
major signs of wear.
- The guides shall be replaced if they show
signs of wear.
- When refitting, respect the way the rollers
are installed.
- Grease the moving flange bore lightly (high
temperature grease).
34
Reproduction ou traduction, même partielle, interdite sans autorisation écrite de Peugeot Motocycles
4
5
752237
2
3