Assistance - Indesit I6T52/AUS Operating Instructions Manual

Burners
AU
 Wait for the cooktop to cool completely. Remove
the burner cap and check the gas outlet holes for
blockages. Clean with a soft bristle brush and warm
soapy water.
 The removable parts of the burners should be
washed frequently with warm water and soap and
any burnt-on substances removed.
 Dry the burner parts thoroughly before replacing.
Ignitors
 The terminal part of the electronic instant lighting
devices and flame failure probes should be cleaned
frequently.
Enamelled Parts (trivets)
 Never use abrasives, scouring pads or sharp
objects. This will cause irreparable damage to the
enamel.
 Clean the enamelled parts with soapy water when
cold and wipe off with a clean, dry cloth. The enamel
could dull if cleaned while still hot.
Stainless Steel and Chromed Parts
 Stainless steel can be marked by hard water that
has been left on the surface for a long time, or by
aggressive detergents containing phosphorus.
After cleaning, rinse and dry any remaining drops of
water.
 Use commercial products designed for cleaning
stainless steel and chromed steel, and follow the
maker's instructions. Care should be taken when
cleaning around graphics.
 Never use steam cleaners or pressure cleaners on
the appliance.
Grill Plate
 We recommend that the grill plate be cleaned while
it is still hot, using the knobs provided to move it
from the cooking rack to the sink. Wash the grill
plate with hot water and non-abrasive detergent.
18

Assistance

Please have the following information to hand:
• The appliance model (Mod.).
• The serial number (S/N).
This information can be found on the data plate located
on the appliance and/or on the packaging.
To keep your cooker running smoothly, we recommend
that you have your cooker serviced every 5 years by an
authorised service agent.