Olivetti FS-603 Service Manual page 65

Field Service Ver. 1.0 Mar. 2006
Code
C1183 Elevate Mechanism malfunctions • The Exit Tray Home Position Sensor (PI9-FN) is not
C1192 Front Aligning Plate Motor mal-
functions
C1193 Rear Aligning Plate Motor mal-
functions
C11A4 Booklet Exit Motor malfunctions
C11B1 Stapler Unit Slide Motor malfunc-
tions
Y104710-1
Item
blocked even after the lapse of a given period of time
after the tray has started moving up.
• An encoder clock input is not detected within a given
period of time during operation of the tray.
• The Front Aligning Plate Home Position Sensor (PI4-
FN) is not unblocked even after the lapse of a given
period of time after the Front Aligning Plate has started
moving from its home position to a position out of the
home position.
• The Front Aligning Plate Home Position Sensor (PI4-
FN) is not blocked even after the lapse of a given period
of time after the Front Aligning Plate has started mov-
ing from a position out of the home position to the
home position.
• The Rear Aligning Plate Home Position Sensor (PI5-
FN) is not unblocked even after the lapse of a given
period of time after the Rear Aligning Plate has started
moving from its home position to a position out of the
home position.
• The Rear Aligning Plate Home Position Sensor (PI5-
FN) is not blocked even after the lapse of a given period
of time after the Rear Aligning Plate has started moving
from a position out of the home position to the home
position.
• The Exit Belt Home Position Sensor (PI7-FN) is not
unblocked even after the lapse of a given period of time
after the Booklet Exit Belt has started moving from its
home position during an initial operation.
• The Exit Belt Home Position Sensor (PI7-FN) is not
unblocked even after the lapse of a given period of time
after the Booklet Exit Belt has started moving from its
home position during an ordinary operation.
• The Exit Belt Home Position Sensor (PI7-FN) is not
blocked even after the lapse of a given period of time
after the Booklet Exit Belt has started moving from a
position not the home position during an initial opera-
tion.
• The Exit Belt Home Position Sensor (PI7-FN) is not
blocked even after the lapse of a given period of time
after the Booklet Exit Belt has started moving from a
position not the home position during an ordinary oper-
ation.
• The Slide Home Position Sensor (PI18-FN) is not
unblocked even after the lapse of a given period of time
after the Stapler Unit has started moving from its home
position.
• The Slide Home Position Sensor (PI18-FN) is not
blocked even after the lapse of a given period of time
after the Stapler Unit has started moving from a posi-
tion not the home position.
Service Manual
8. Trouble code
Description
57