Boat Show Mode; Heading Display Damping - Raymarine Compass Manual

22

Boat Show Mode

This is a programme that simulates heading information for dealer
demonstration purposes.
LOCK
HEADING
AVERAGE
Cal
LOCK
Boat show mode is toggled on (S1) and off (S0) using the
Press LOCK to advance to "Heading Display Damping" or exit extended
calibration as described on page 23.

Heading Display Damping

The heading displayed by the ST30 Compass is the average reading taken
from the fluxgate compass. Damping controls the number of readings
used in each averaging calculation. The higher the value displayed at the
damping display the slower the screen update of heading information.
The default value is d4 which can, if so required, be adjusted using the
or key.
LOCK
HEADING
AVERAGE
LOCK
Press LOCK to advance to " Off-Course Bargraph Damping" or exit
extended calibration as described on page 23.
ST30 Compass Installation and Operation Handbook
COMPASS
Cal
COMPASS
or key.