Graco Fusion CS20F1 Instructions - Parts Manual page 15

9. Disengage piston safety lock, page 12.
F . 10
IG
10. Trigger gun to check for full mix chamber
travel and to prime ClearShot Liquid dosing
pump. See ClearShot Liquid Cartridge
Installation/Removal, page 23.
11. Engage piston safety lock, page 12.
F . 11
IG
12. Turn on proportioner.
13. Open B (RESIN) fluid valve. Then open A
(ISO) fluid valve.
F . 12
IG
312666P
14. Disengage piston safety lock, page 12.
TI12240a
F . 13
IG
15. Test spray onto cardboard. Adjust pressure
F . 14
IG
TI11326a
16. The gun is now ready to spray.
Air supply is required for gun actuation. Do
not disconnect gun air supply until fluid pres-
sure is relieved, page 17.
TI11333a
and temperature to get desired results.
CAUTION
Setup
TI12240a
TI11334a
15