Table of Contents
Advertisement
A
D: T
PPENDIX
ROUBLESHOOTING
E
C
RROR
ODE
(
4
)
LAST
DIGITS
0011
The
could not be found.
0012
The modem could not be
found.
0013
Memory allocation error.
0014
There is a problem with the
IP address.
0015
The DHCP server did not
respond. IP-Reach could not
acquire an IP address.
0016 – 0019
There is a problem with one
of the IP-Reach startup files.
001A
Error
initializing the UDP socket.
001B
Error
initializing the TCP write
socket.
001C
Error
initializing the TCP read
socket.
001D – 001E
Resource allocation error.
001F
Could not listen to the TCP
write socket.
0020
Could not listen to the TCP
read socket.
0021
TCP listen process failed.
0022
UDP listen process failed.
0023
SSL write failed.
255-80-3100
M
EANING
Ethernet
controller
There is a problem with the IP-Reach hardware.
Power off the system and make sure the frame
grabber card is inserted firmly. If the problem
persists, there may be a problem with your IP-Reach
hardware.
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
Check the IP address configuration and reboot.
Make sure your DHCP server is operating correctly
and then reboot IP-Reach.
Restore the software and file system from the
Recovery CD-ROM.
occurred
while
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
occurred
while
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
occurred
while
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
Recovery CD-ROM.
Reboot IP-Reach. Make sure the BIOS memory test
recognizes at least 64MB of RAM. If the problem
persists, restore the software and file system from the
R
ECOMMENDATION
75
Advertisement
Table of Contents
