4
①
②
③
Turn
Retaining washer
CARRY THIS PEDALBOARD
HOW TO ASSEMBLE
Do this assembly carefully to avoid injury to hands or feet.
Disconnect the power cable before this procedure.
Insert into the
opening
Insert the Retaining Washer and Knob Bolt
into the hole provided on the Expression Pedal
bracket as shown on the left.
Insert
Turn the ring
Connect the Keyscan Cable as shown.
Carefully slide the Expression Pedal assembly into the re-
taining brace as shown on the left.
Th en use the Knob Bolt to attach the Expression Pedal to
the base of the Pedalboard.
Make sure that the Expression Pedal is mounted in stably
after above procedure.
If the Pedalboard needs to be
moved, carry it in the manner
shown on the left.
DO NOT attempt to move the
Pedalboard either by lifting on one
corner or by using the Heel Rest as
a hand grip. Doing so may result in
injury.