Names And Functions - Hammond XPK-250W Owner's Manual

❶ PEDALBOARD
25-notes, radial fl at type, non-velocity pedalboard.
❷ HEEL REST
❸ ADJUSTER
Adjusts the height.
❹ EXPRESSION PEDAL
Intelligent Expression Pedal compatible with Hammond's
proprietary  interface which allows transmission of
MIDI data as well as Expression information.
❺ FOOT SWITCH
Allows the player to control various functions while playing.
❻ KNOB BOLT
Use to attach the Expression Pedal to the pedalboard.
❼ RETAINING WASHER
Use to secure the Knob Bolt.
❽ KEY-SCAN CABLE
Scans the Pedalboard, and reads the playing notes.
Carries note information from the Pedalboard to the host in-
strument.
❾ H-BUS JACK
Connect to the host instrument via the Hammond 
cable which serves as a carrier of both performance information
and DC power.

NAMES AND FUNCTIONS

❾
❻
❼
❽
❺
❹
❶
Upstream
❷
FOOT SW JACK
Allows the player to use the Foot Switch on another instru-
ment. Connect via a standard 1/4˝ cable.
When plugged in, the transmitting foot switch message is
stopped on the MIDI and 
EXPRESSION JACK
Allows the player to connect the Expression Pedal to another
instrument via a stereo 1/4˝ cable.
When plugged in, the transmitting Expression message is
stopped on the MIDI and 
MIDI OUT JACK
Transmits the performance information. Connect to the MIDI
IN of the receiving instrument.
DC IN JACK
Use to connect a Hammond AD1/AD3-1508 power adaptor.
CORD HOOK
Use to relieve strain on the power cord when plugged in.
LED
Displays MIDI note status. Also displays status of special fea-
tures (see page 9).
H-BUS CABLE
2.5m. Use with sticking  label.

Downstream
Downstream side
❸
3