Installation And Disassembly Of Heat Discharge Pipe - Nobu IRIS Owner's Manual

Installation and disassem b ly of heat discharg e pipe
Install heat discharg e pipe
1. Rotate oint A and oint
2. Insert oint A of heat
discharge pipe (the
side with " TOP" is
upwards) into the
groove until you
hear a sound.
3. Aim the locating pole of oint
rotate it slightly to make oint
clockwise into the two ends of heat discharge pipe.
clockwise
oint A
clasp
groove
of heat discharge pipe at the opening of oint C
and oint C connect tightly.
oint
clockwise
oint
heat discharge pipe
the side with " TOP" is upwards
locating pole
oint C
tightened status
19
opening