Table Of Contents; Safety Precautions - Fujitsu UTY-LNHUM Operating Manual

CONTENTS
SAFETY PRECAUTIONS ................................................ 1
FEATURES AND FUNCTIONS ....................................... 2
NAME OF PARTS ........................................................... 3
PREPARATION ............................................................... 4
OPERATION .................................................................... 5
TIMER OPERATION ....................................................... 7
SLEEP TIMER OPERATION ........................................... 8
ADJUSTING THE DIRECTION OF
AIR CIRCULATION ......................................................... 9

SAFETY PRECAUTIONS

● Before using the appliance, read these "SAFETY PRECAUTIONS" thoroughly and operate in the correct way.
● The instructions in this section all relate to safety; be sure to maintain safe operating conditions.
This mark indicates procedures which, if improperly performed, might lead to the death or serious
WARNING
injury of the user.
• If a problem (burning smell, etc.) occurs, turn off the electrical breaker immediately to stop operation, and then consult
authorized service personnel.
This mark indicates procedures which, if improperly performed, might possibly result in personal
CAUTION
harm to the user, or damage to property.
• Do not expose the controller directly to water.
• Do not operate the controller with wet hands.
• Do not touch the switches with sharp objects.
• Always turn off the electrical breaker whenever cleaning
the controller, the air conditioner or the air fi lter.
En-1
SWING OPERATION .................................................... 10
ECONOMY OPERATION .............................................. 10
MINIMUM HEAT OPERATION .......................................11
SELECTING THE REMOTE CONTROLLER
SIGNAL CODE .............................................................. 12
TROUBLESHOOTING .................................................. 13
OPERATING TIPS ......................................................... 14
• Ensure that any electronic equipment is at least 1m
away from the controller.
• Avoid installing the controller near a fi replace or other
heating apparatus.
• Do not use infl ammable gases near the controller.