Ethernet Ports Network N1 Und N2; Ethernet Ports Network P1 Und P2; Control Port; Usb Host - Siemens BANY Agent Compact Operating Instructions

3.5 Ethernet Ports Network N1 und N2

These ports can be used for Fast Ethernet recording. N1 and N2 can be connected to
switch mirror ports.

3.6 Ethernet Ports Network P1 und P2

These ports are used for recording and sending Ethernet or PNIO data.
Fast Ethernet and Gigabit Ethernet is supported.

3.7 Control Port

Ctrl: RJ45 Ethernet Port
connect the Bany Agent to a PC via this port.

3.8 USB Host

The hardware contains one USB host port. Mass storage devices can be
connected here.
The standards USB 1.1 und USB 2.0 are supported.
The USB interface provide a power supply for connected devices with max. 500mA.
BANY Agent
Compact Operating Instruction
17