Siemens BANY Agent Compact Operating Instructions page 42

-Kepp to the installation guidelines
The product meets the requirements if you adhere to the installation and safety
instructions contained in this documentation and in the following documentation when
installing and operating the product.
-You can always find the latest documentation on the Internet !
The current description of the currently available products can always be found on the
Internet under specified entry IDs/Internet pages:
SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks Manual 8763736
EMC Installation Guideline, Planning Guide 28518276
-Working on the product
To protect the product from electrostatic discharge, personnel must first discharge any
electrostatic charge from their body before touching the product.
Note
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is
therefore no declaration of conformity relating to the EC Machinery Directive
2006/42/EEC for this product.
Machinery directive
The product is a component in compliance with the EC 2006/42/EG. According to the
machinery directive, we are obliged to point out that the product described is intended
solely for installation in a machine.
Before the final product can be put into operation, it must be tested to ensure that it
confirms with the directive 2006/42/EEC.
Note
Note for the manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is
therefore no declaration of conformity relating to the EC Machinery Directive
2006/42/EEC for this product.
Note for manufacturers of machines
This product is not a machine in the sense of the EC Machinery Directive. There is
therefore no declaration of conformity relating to the EC Machinery Directive
89/392/EEC for this product.
BANY Agent
Compact Operating Instruction
42