Rangemaster Toledo 90 Gas Installation And User Manual page 24

You will need the following equipment to complete the
cooker installation satisfactorily
STABILITY BRACKET
If the cooker is to be
supplied with gas through
a flexible hose, a stability
bracket or chain must be
fitted.
These are not supplied
by with the cooker but
are available at most
builders merchants.
You will also need the following tools:
1. Electric drill
2. Masonry drill bit
(only required if fitting the cooker on a stone or concrete floor)
3. Rawlplugs
(only required if fitting the cooker on a stone or concrete floor)
4. Steel tape measure
5. Cross head screwdriver
6. Flat head screwdriver
7. 4mm & 3mm Allen keys
8. Spirit level
9. Pencil
10. Adjustable spanner
11. Screws for fitting stability bracket
GAS PRESSURE
TESTER
FLEXIBLE GAS HOSE
Must be in accordance
with the relevant
standards. For LP Gas it
should be suitable for
LPG, capable of 50mbar
pressure, 70°C
temperature rise and carry
a red stripe, band or label
24
MULTIMETER
(for electrical checks)