Table of Contents
Advertisement
TROUBLESHOOTING
Problem
Scan Mode, Nothing to
Scan
Scanning Interrupted Every
Few Seconds
All Channels Out of Range
DEFAULT BAND SETTINGS
Frequency Range
25.0000
26.9600
26.9650
27.4050
27.4100
27.9950
28.0000
29.6800
29.7000
49.9900
50.0000
53.9800
54.0000
71.9500
72.0000
75.9500
APPENDIX
Solution
•
Make sure you Set Your Location to scan the Database.
•
Make sure Favorites Lists are enabled in Set Scan
Selection.
•
Make sure Service Types are enabled for the Channels
you want to hear.
•
Make sure you have locations programed if Use Location
Control is On.
•
Make sure longitude and latitude are N and W (for N
America).
•
Make sure Systems/Departments/Channels are not
Avoided.
•
Make sure Favorites List/System/Department/Site quick
key is enabled.
•
(Search with Scan) Make sure Search with Scan is
enabled in Select Lists to Monitor and the Search for Menu
and for the Custom Search.
•
Turn off Priority Scan.
•
Change Priority Interval.
•
Turn off Close Call Priority.
•
Turn off Weather Priority.
•
Set Channel Delay longer.
•
Set positive Channel Delay.
•
Increase your range.
•
Change your location.
•
Turn Location Control off for the Favorites List.
Mode
Step (kHz)
AM
5
AM
5
AM
5
NFM
20
NFM
10
NFM
20
WFM
50
FM
5
46
Band
Petroleum Products & Broadcast Pickup
CB Class D Channel
Business & Forest Products
10 Meter Amateur Band
VHF Low Band
6 Meter Amateur Band
VHF TV Broadcast 2 – 4
Intersystem & Astronomy
Advertisement
Table of Contents
