Table of Contents
Advertisement
Option
Set Attenuator
Set Avoid
Set Location Information
Delete Site
New Site
Edit Department – Create/Edit departments which hold the channels scanned on the system.
Select a department or select New Department and set a name for the department. Then, see the
following table for department options.
Setting
Edit Name
Set Department Quick Key
Edit Channel
Set Location Information
Set Avoid
Delete Department
New Department
Channel Options
After you enter the Talk Group ID (for trunked systems) or frequency (for conventional systems, the
following channel options are available.
Setting
Set Name
Edit TGID
Set TDMA Slot
Description
Set whether attenuation is applied
for the site.
Set the avoid status for the site.
Select whether to use a circle
or rectangles to define the site
location, then enter the appropriate
parameters to define the site
location.
Delete the site from the system.
Create a new site for the system.
Description
Edit the name displayed when the
department is scanned.
Set/change the quick key used for
the department
Enter the TGIDs or Frequencies
for the department. See Channel
Options, below
Select whether to use a circle or
rectangles to define the department
location, then enter the appropriate
parameters to define the department
location.
Set/change the avoid status for the
department
Delete the department and all its
channels
Create a new department
Description
Assign a name that is displayed for
the channel while scanning
Edit the talk group ID set for the
channel
Set the slot used by the channel.
36
Applicable Systems
PMDEL
PMDEL
PMDEL
PMDEL
PMDEL
Applicable Systems
PMDELC
PMDELC
PMDELC
PMDELC
PMDELC
PMDELC
PMDELC
Applicable Systems
PMDELC
PMDEL
D
Advertisement
Table of Contents
