Important Information; The Fcc Wants You To Know; Modification Notice; Part 15 Information - Uniden SDS100 Owner's Manual

Hide thumbs Also See for SDS100:
Table of Contents

Advertisement

THE FCC WANTS YOU TO KNOW

IMPORTANT! This scanner has been manufactured so that it will not tune to radio frequencies
assigned by the FCC for cellular telephone usage. The Electronic Communications Privacy
Act of 1986, as amended, makes it a federal crime to intentionally intercept cellular or cordless
telephone transmissions or to market this radio when altered to receive them. Installation,
possession, or use of this scanner in a motor vehicle may be prohibited, regulated, or require a
permit in some states, cities, and/or local jurisdictions. Local law enforcement officials can provide
you with information regarding the laws in your community.

MODIFICATION NOTICE

Changes or modifications to this product not expressly approved by Uniden, or operation of this
product in any way other than as detailed by this Users Guide, could void your authority to operate
this product.
Warning: Modification of this device to receive cellular radiotelephone service signals is prohibited
under FCC Rules and Federal Law.

PART 15 INFORMATION

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device. In Canada, a radio license must be obtained prior to possession and use of this scanner
receiver.
Le présent appareil est conforme aux normes CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

IMPORTANT INFORMATION

2

Advertisement

Table of Contents
loading

Table of Contents