Table of Contents
Advertisement
Button
Power/Light
Avoid
Zip/Services
Soft Keys
Menu
Replay/Record
Number keys (general)
See individual key
functions below for
additional functions
1 / SRCH1
2 / SRCH2
3 / SRCH3
• Press and hold to turn the scanner on or off.
• Tap to turn on/off the display backlight. Note that when the display
backlight is off, nothing is visible on the display.
• Press once to temporarily avoid the current channel or frequency
(in direct tune mode).
• Press twice to permanently avoid the current channel or frequency.
• During scan, or scan hold press the left soft key (System), then tap
avoid once (for temporary avoid) or twice (for permanent avoid) to
avoid the currently scanned system.
• During scan, or scan hold press the middle soft key (Department),
then tap avoid once (for temporary avoid) or twice (for permanent
avoid) to avoid the currently scanned department.
• Press to enter country-zip/postal code.
• Press Func then Zip to select Service Types to be scanned.
The function of these three keys change depending on the current
mode. The function is indicated by the labels at the bottom of the
display.
• Press to enter Menu mode.
• Press to return one level in Menu mode.
• Press Func then Menu for Search menu in Search mode.
• Press Func then Menu for Close Call menu in Close Call mode.
• Press to Replay the last transmissions.
• Press Func then Replay to start/stop recording
• Press and hold to Review Recordings.
• Press to select Favorites Lists in Scan mode.
• Press 0-9 to use direct entry in a Hold mode.
• Press 0-9 to toggle custom search bands on or off in Custom Search
mode.
• Press 0-6 to toggle Close Call bands on or off in Close Call mode.
• Press to enter the digit 1 in any numeric entry mode.
• In channel hold mode, press Func then 1 to toggle on/off the
search you've assigned to SRCH1.
• Press to enter the digit 2 in any numeric entry mode.
• In channel hold mode, press Func then 2 to toggle on/off the
search you've assigned to SRCH2.
• Press to enter the digit 3 in any numeric entry mode.
• In channel hold mode, press Func then 3 to toggle on/off the
search you've assigned to SRCH3.
16
Operation
Advertisement
Table of Contents
