Silvercrest SEMR 850 A1 Operating Instructions Manual page 5

use and if they have understood the dangers which may arise during
the appliance use.
• Before connecting the appliance to the power supply, make sure that
the voltage indicated on the plate on the bottom of the machine cor-
responds to the local mains voltage.
• The use of extension leads, which have not been authorised by the
appliance manufacturer, may cause damage and accidents.
• If the electric cable is damaged it must be replaced by the manufac-
turer or its Technical Assistance Service, or in any case by a person
with similar qualifications, in order to avoid any risk.
• Never let the live parts come into contact with water: this may cause
a short circuit.
• Unplug before any cleaning or maintenance operations.
• Do not immerse the appliance in water or other liquids.
• Always turn off the appliance and remove the power cable plug from
the socket-outlet before filling the tank with water.
• Do not lift the appliance by grasping its water tank or its tray, but only
by grasping its body.
• Choose a sufficiently well lit and clean environment, with an easily
accessible electric socket.
• Avoid putting excessive quantities of water into the tank.
• Never leave the appliance unattended when it is connected to the
power supply.
• The appliance must be used and rested on a stable surface.
• The appliance is not to be used if it has been dropped, if there are
visible sign of damage or if it is leaking. Do not use the appliance if
the power cord or the plug are damaged, or if the appliance is faulty.
To prevent any accident, all repairs, including the replacement of the
power cord, must be carried out by an Authorised Service Centre or,
in any case, by qualified personnel.
DANGER from other causes
GB / IE
IT
GB / IE 5