Adding A Tiered Legacy Switch - Avocent Vertiv AutoView 2108 Installer And User Manual

Figure 2.3 Tiering the Switch With a UTP Analog Switch
Table 2.3 Descriptions for Tiering the Switch
ITEM
1
2
3
4

2.4.2 Adding a tiered legacy switch

The following figure illustrates a tiered legacy switch configuration.
To add a legacy switch (optional):
1. Mount the switch into your rack. Locate a UTP cable (up to 30 meters) to connect your switch
to the legacy switch.
2. Attach one end of the UTP cable to the ARI port on your switch.
Vertiv | Avocent® AutoView™ 2108/2216/3108/3216 Switch Installer/User Guide |
DESCRIPTION
Local User
ARI Connection
UTP Connection
ACI Connection (chain icon)
10